« Back to course list

Well Testing, Interpretation and Design (RES39)

    Description

    This course provides structured information about testing methods, data acquisition and related downhole tools and surface equipment used in the hazardous business of well testing. It includes a comprehensive overview of the technology application, details of the hardware with its benefits and limitations, all important operational aspects of oil and gas well testing plus safety procedures and recommended practices.

    Course Level: Basic

    Designed for you, if you are...

    • A geologist, petrophysicist, reservoir engineer, supervisor or manager who is involved in formation evaluation, reserve estimation and general reservoir engineering
    • An individual who is directly involved in well test operations
    • Someone who deals with service companies offering well testing
    • Someone with basic reservoir engineering knowledge

    Previous experience in well testing is beneficial but not mandatory.

    How we build your confidence

    • A comprehensive overview of practical well testing operations
    • Typical offshore and onshore equipment set-up with stress on safety precautions
    • Significant time is spent on test design and prediction runs
    • Demonstration of commercial software for well test interpretation with numerous examples

    The benefits from attending

    By the end of the course you will feel confident to:

    • Select appropriate test equipment for a given well testing task
    • Review the testing procedures and evaluate operations safety
    • Understand how to apply the commercial software for WT interpretation
    • To design a well test

    Topics

    • Reasons for well testing
    • Methodology of well testing
      - Initial perturbation
      - Constant pressure vs. constant rate condition
      - How to deal with wellbore storage
      - Types of well test sequences
    • Downhole hardware options - how the well test data is gathered
      - Testing while drilling
      - Testing after completion of drilling
      - Traditional versus wireline formation testing
    • Surface testing equipment
      - Onshore and offshore testing operations
      - Pressure gauges
      - Gas, oil and water flow measurement
      - Sub-sea equipment
    • Test design
    • Well testing operations
      - Equipment checks
      - Well control
      - Perforating
      - Fluids behaviour and sampling operations
      - Stimulation in well testing
    • Safety in well testing operations
    • Job responsibilities
    • Interpretation approach
      - Superposition concept
      - Diagnosing near wellbore conditions, reservoir behaviour and boundaries
      - Deconvolution
      - Dealing with limited reservoirs
      - Predicting the well behaviour


    Enquiry

    Name:
    E-Mail:
    Company:

    Message:
    Newsletter:

    HOT Engineering GmbH

    Parkstrasse 6
    8700 Leoben
    Austria

    Tel.: +43 3842 43053-0
    Fax: +43 3842 43053-1
    E-Mail: hot@hoteng.com

    HOT Reservoir Solutions GmbH

    Am Stollen 19
    38640 Goslar, Germany

    Tel.: +49 151 42440 739
    Fax: +43 3842 430 53-1
    E-Mail: hotrs@reservoirsolutions.com

    HOT Middle East

    138 Fatimah Bint Mubarak Street
    Al Yasat Tower, P.O. Box: 97
    Abu Dhabi, UAE

    Tel.: +971 2 672 0730
    Fax: +971 2 674 2422
    E-Mail: me@hoteng.com

    HOT Engineering Libyan Branch

    Essyahia City
    Tripoli, Libya

    Tel.: +218 21 483 7278
    Fax: +218 21 483 2283
    E-Mail: libya@hoteng.com

    HOT Engineering GmbH   Tel: +43 3842 43 0 53-0   Fax +43 3842 43 0 53-1   hot@hoteng.com